Skip to main content

Assign, configure and connect VPNs to a site

Under Locations > Connected VPNs, you can assign the globally defined VPNs to the locations where they are to be used.

  1. Click Connect VPN and select a globally defined VPN. For more information, see: Configure Access VPNs and make VPN settings
  2. Confirm the selection.

Advanced configuration options for EC-M, L and XL​

Hub and Spoke VPNs​

For configuration options related to Hub and Spoke VPNs, please refer to Hub and Spoke VPN configuration

Configuring default routes​

After adding a VPN to the location, you can set the location as the default VPN gateway. More information can be found here: Configure default route

Manage bandwidth​

After adding the VPN, you have the possibility to manage the bandwidth per VPN.

  1. Click on Manage bandwidth
  2. For each location you can choose whether the bandwidth is distributed evenly to all VPNs (Auto) or whether you want to allocate it manually (Manual).
  3. If you want to control the bandwidth manually per VPN, you can enter the percentage for this VPN / VPN Cluster under Bandwidth.
note
  • The bandwidth allocated per VPN defines the minimum bandwidth made available to the VPN.
  • If the other VPNs do not use their bandwidth, a VPN may exceed its defined bandwidth.